Honda Goldwing GL1200 (some GL1100) water pump rebuild kit

Description

Rebuild kit for Honda Goldwing waterpumps with
steel
impeller.
The kit includes the mechanical seal, both bearings and both outer O-rings, brand new, top quality.
You get what see on the first picture (the old pump on the second picture is not included).
Postage includes airmail with trk id.
Before You buy: Make sure Your pump is rebuildable, the shaft must nor be worn where the bearings are located and on its split end.
I can provide a very detailed and pictured description of the rebuild process to every buyer or everybody else who is interested.
See url in the first picture.
Very good tutorials can also be found at www.ngwclub.com (free membership).
When You replace the waterpump, You have to open the front engine case. I can also provide a good description.
There are gasket kits which include all You will need for this procedure. Here on ebay at
PeakMoto
Steel impeller pumps were built in GL1200s and late GL1100s. Early GL1100s and all GL1000s had a bakelite impeller pump. Both can be interchanged.
Honda has discontinued the bakelite impeller pumps, when You buy a new pump (179USD) at Honda, You get a metal impeller.
This rebuild kit is for steel impeller pumps only!
Got a bakelite pump? Check my other items!
Email me with any questions before You buy, please!
Thank You
Ray
BTW the other guy on ebay who has stolen my picture and who removed the o-rings from the picture SELLS CRAP! Buy the original here :-)