Intubator Box (made out of an almost unbreakable plastic 3/16 polycarb) Quality

Description

This is one 5 sides intubator box made in 3/16 clear polycarbonate (
the plastic that doesn't break
). We will ship the 5 panels flat with 6 blocks of attachment and screws. You will need to do the assembly. It takes about 8 minutes max to do the assembly. No gluing.
And there, you can use it to protect doctors and nurses, or the way you see fit. Easy to clean. The edges are SMOOTH,not polish to prevent the creasing (micro cracks that happen while using alcohol ,ammonia or such)
dimensions are
: 20.5" w by 19" high and 15.75" deep  the back is close on the top by a 5" high panel.
the front has 2 holes of 5.5" diameter smooth (to prevent to irritate the wrist of the manipulator) distant of 6.5" each other inside edge to inside edge and at 10" high center from the bottom
Disclaimer
While the design in concept appears to be a good solution in reducing the exposure to doctors/nurses doing intubation procedures, Desert star plastics makes no legal claims to that. It is the responsibility of the user to determine suitability of use and real world applications. No other claims or warrants are express or implied.
If you need an express shipping, thank you to contact Desert Star plastics via EBAY