Pressure Washer Wand Chemical Injector Acid Injector

Description

HIGH PRESSURE CHEMICAL INJECTOR (UPSTREAM)
Pressure washer wand acid injector, sprayer, foamer.
The high capacity acid injector is designed to be used with most acid solutions and will work in ratios 4 to 1 and higher. Nozzles with spray angles of 15, 40 and 65 deg are furnished so that you can custom fit the proper angle spray to your job. The acid injector also works well without a nozzle by applying solution directly in a round spray pattern. It will also work effectively as a Foamer with the use of a foaming type detergent.
SIMPSON CHEMICAL INJECTOR STYLE (UPSTREAM)
Complete, stainless steel body, plated zinc plug Nozzle barrel propels solution to 50' 5000 PSI maximum, complete with 30' tubing and quick disconnects
Kit Includes:
(1) Acid Injector body
(3) Nylon Hose Clamp
(1) Hose
(1) PVC ball valve
(1) Strainer Coupler assembly
(3) Spray nozzles
(1) Cone Foot Strainer Body
(1) Replaceable Cone Foot Strainer
For reference Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.